voltage drop compensators

our solution to long cable runs

Small Cables
HUGE SAVINGS

Purposefully designed with the sole intention to eliminate high inherent voltage drops, Ashley-Edison’s Voltage Drop Compensators solves this by significantly boosting up the low voltage at incoming supply to its optimal set output value and maintains it continuously and automatically. This results in substantial cost savings on reduced electrical power cables, conventionally used to overcome voltage drop.

200KVA to 2,500KVA
Compensating Voltage Drops of up to 125V
Reducing Oversized Cable Costs
Available with Parallel Redundancy Module

get more than
what you pay for

Voltage Drop Compensator

Save more, for less

Massively reduce large and expensive electrical power cables by “compensating” for high voltage drops, the cost-effective way. This added advantage also ensures cable installations are made more convenient due to smaller cable sizes.

Parallel redundancy

Ashley Edison’s proven, field-tested Parallel Redundant Voltage Regulation Control Modules (VRCM) are incorporated on each phase of our Voltage Drop Compensators. In the unlikely event of a fault on one module, the other parallel module will operate automatically without causing interruption to the load. The other unaffected phases will operate as normal, ensuring continual voltage control regulation, whilst compensating for voltage drop at the load end.

Constant & continually on

Regardless of load change on demand, the output voltage is kept constant, from no load to full load. This optimises and prolongs equipments’ life span, leading to more passive savings from reduced maintenance costs, while concurrently taking care of voltage drop issues .

Protecting your uptime

The Ashley Edison Voltage Drop Compensator ensures loads are receiving appropriate and stable voltage, improving overall system performance and efficiency, minimising unforeseen system downtime.

Available in Indoor IP20 (NEMA 1 Style) and Outdoor IP54 (NEMA 3 Style) Enclosures

Technical Features

Input Circuit Breaker

Overcurrent Protection.

Bypass Control Switch

Manual Electronic Control Bypass Facility.

Inbuilt High Overload
Capability

For loads with an inherent initial high current draw on start-up.

Transient Voltage Surge Suppression

Protects electrical and electronic loads against harmful high-energy surges, transients and voltage spikes.

Phase Failure Protection

Loading Protection in the event of Phase Failure. 

Soft Start-Up Load Protection

Protection of the load from momentary overvoltage situations on startup.

Over / Low Voltage Protection

Ability to automatically shut down the Voltage Stabiliser in the event of the input supply voltage going outside the input voltage window.

Lightning Surge Arrestors

Protection against extremely high voltage surges and transients caused by lightning strikes on the supply line.
Standard for outdoor models.

volt-free remote monitoring contacts

With RS-485 interface or Mimic Panel option.

cloud-based data system analysis

Real-time wireless applications for Measurement and Verification of energy and resource consumption.

COMPLIANT WITH INTERNATIONAL STANDARDS
ISO 9001:2015 | CE Mark | BS EN 55022 | BS EN 61000
BS EN 60529 | CE MARKED

Product FINDER

SINGLE PHASE CVC RANGE​
Voltage drop compensators

cvc-H

1KVA ~ 100KVA

  • Input Range:
    From 77V~133V (depending on model selection)
  • Output:
    220V / 230V / 240V
  • Indoor IP20 / Outdoor IP54 Enclosure
  • Input Circuit Breaker
  • Floor Standing

cvc-L

1KVA ~ 50KVA

  • Input Range:
    From 77V~133V (depending on model selection)
  • Output:
    100V / 110V / 115V / 120V
  • Indoor IP20 / Outdoor IP54 Enclosure
  • Input Circuit Breaker
  • Floor Standing
THREE PHASE CVC-3P RANGE​
voltage drop compensators

cvcl-H-3P

250KVA ~ 2500KVA

  • Input Range:
    From 290V~430V (depending on model selection)
  • Output:
    380V / 400V / 415V
  • Indoor IP20 / Outdoor IP54 Enclosure
  • Parallel Redundant Voltage Regulating Control Module
  • Floor Standing

cvc-H-3P

6KVA ~ 750KVA

  • Input Range:
    From 290V~430V (depending on model selection)
  • Output:
    380V / 400V / 415V
  • Indoor IP20 / Outdoor IP54 Enclosure
  • Input Circuit Breaker
  • Floor Standing

cvc-hd-3p

6KVA ~ 600KVA

  • Input Range:
    From 290V~430V (depending on model selection)
  • Output:
    380V / 400V / 415V
  • Indoor IP20 / Outdoor IP54 Enclosure
  • Input Circuit Breaker
  • Floor Standing

ENQUIRE NOW

Not sure which equipment type suits your operations?

Or are you looking for a quote?

 

No worries!

 

Drop us an enquiry and we’ll get back to within 24 hours and discover how we can optimise your system.

ASHLEY Edison International LTD

OUR PROJECTS

avr cost pays for itself
Secrets To How Your AVR Cost Is Actually Paying For Itself
automatic voltage regulators changed solar industry
How Automatic Voltage Regulators Transformed The Solar Industry
voltage drop
RADIO TELEVISYEN MALAYSIA (RTM) & PT INDOSAT TBK
Banyan Tree – Seychelles
Singapore Power (SP Group) – East West Transmission Cable Tunnel Project
coca cola
Coca-Cola – Saudi Arabia
mains voltage stabiliser
Embassy
U.S. Embassy – Papua New Guinea
ashley edison's solution
TÜV SÜD
ashley edison project
British Petroleum – Georgia
ARMY
Military Grade Voltage Protection
Stopping voltage fluctuations
Humber Bridge – U.K.
ABB – Latvia
Scroll to Top

Three Phase

SESL-H-3P-S Model
Large Capacity Rating
200 to 2,000 KVA

 

Enclosure 335
1000W x 1300H x 580D (mm)
250~300 KVA ± 15%
120~200 KVA ± 20%

 

Enclosure 336
1280W x 1480H x 660D (mm)
400 KVA ± 15%
250 KVA ± 20%

 

Enclosure 337H
1880W x 1950H x 880D (mm)
500 KVA ± 15%
300 KVA ± 20%

 

Enclosure 339
1470W x 1950H x 1340D (mm)
600 ~ 1,500 KVA ± 15%
400 ~ 1,000 KVA ± 20%
300 ~ 750 KVA ± 25%
300 ~ 600 KVA ± 30%

Three Phase

SES-H-3P-S Model
Added I/P Breaker Protection
60 to 1,000 KVA

 

Enclosure 333
490W x 800H x 990D (mm)
≤ 100 KVA ± 15%

 

Enclosure 334
540W x 900H x 1000D (mm)
120 – 150 KVA ± 15%

 

Enclosure 335
1000W x 1300H x 580D (mm)
180 – 300 KVA ± 15%
120 – 200 KVA ± 20%
120 – 150 KVA ± 25%

 

Enclosure 336H
1880W x 1480H x 660D (mm)
400 KVA ± 15%
250 KVA ± 20%
180 ~ 200 KVA ± 25%

 

Enclosure 337H
1880W x 1950H x 880D (mm)
500 KVA ± 15%
300 KVA ± 20%
250 KVA ± 25%

 

Enclosure 339H
2170W x 1950H x 1340D (mm)
600~1,000 KVA ± 15%
400~600 KVA ± 20%
300~400 KVA ± 25%

Single Phase

SES-H-S Model
Added I/P Breaker Protection
1 to 100 KVA

Enclosure 102
270W x 460H x 490D (mm)
≤ 20 KVA ± 30%
≤ 15 KVA ± 20%
≤ 10 KVA ± 25%
≤ 10 KVA ± 15%

Enclosure 103
400W x 580H x 500D (mm)
25 KVA ± 15%
20 KVA ± 20%
15 KVA ± 25%

Enclosure 332
380W x 670H x 780D (mm)
30 KVA ± 15%

Enclosure 333
490W x 800H x 990D (mm)
40 ~ 50 KVA ± 15%
25 ~ 30 KVA ± 20%
20 ~ 25 KVA ± 25%
15 ~ 20 KVA ± 30%

Enclosure 334
540W x 900H x 1000D (mm)
60 ~ 75 KVA ± 15%
40 ~60 KVA ± 20%
30 ~ 50 KVA ± 25%
25 ~ 40 KVA ± 30%